mariovaldez.net

Hi

I have the phprojekt V.4 and installed the CMS v.5.1. I followed all the instructions, but I get just a blank page inside the phprojekt.

I read the faq and tried to modify the cm_lib_inc, but it seems to be OK:
// Set error reporting level.
error_reporting(E_ALL & ~E_NOTICE);

Please, could you help me?

Calipsy:

> I have the phprojekt V.4 and installed
> the CMS v.5.1. I followed all the instructions,
> but I get just a blank page inside the phprojekt.
> I read the faq and tried to modify the
> cm_lib_inc, but it seems to be OK:
> // Set error reporting level.
> error_reporting(E_ALL & ~E_NOTICE);

I need to update the FAQ. In Phprojekt 4.x, you need to take some additional steps to fully enable error reporting. Follow these steps:

In Phprojekt, open the index.php file and in line 19 change the "error_reporting(0)" to "error_reporting(E_ALL)". Then try again to login in Phprojekt. If no error is displayed then, besides this change, you'll need to modify the lib.inc.php file in the "lib" directory: comment out the lines 53 and 54 (adding two slashes // at the beginning of each line).

That should enable the error reporting in Phprojekt. If you still get nothing, let me know.

Regards,

Mario A. Valdez-Ramirez.

I change error_reporting(0);

to

error_reporting(E_ALL);

in index.php and get the following error when trying to login.

Warning: Undefined variable: login in /www/rhgraphicdesign/www/project_manager/index.php on line 24

Warning: Cannot send session cache limiter - headers already sent (output started at /www/rhgraphicdesign/www/project_manager/index.php:24) in /www/rhgraphicdesign/www/project_manager/lib/gpcs_vars.inc.php on line 2
dule/$module.php?mode=view".$sid."' marginwidth=2 marginheight=2>"; break; } include_once ("cm/cm_mainindex.inc.php"); // perform the frame set echo $startframeset.$frameset1.$frame_o.$frameset2.$stopframeset; ?>

Do you have this problem when login in Phprojekt, in the CMS module (/cm/index.php) or in both? And, if you disable the CMS module, is everything else Ok in Phprojekt?

I'm a bit confussed by the "Cannot send session cache limiter" message. It seems you the index.php script is displaying something (may be you added some echo sentence at line 24) and also you have output_buffering disabled in the php.ini file of your server.

Please check that there are not instructions like echo in index.php. And tell me if the problem is only with the CMS module.

Mario A. Valdez-Ramirez.

make sure at the end of each file you edit you delete ALL spaces after the last piece of code. In other words, go the the last ?> and right after the > delete anything that follows, including spaces, etc.

hi there,

I discovered the same problem after changing line 19 in index.php like Guest did before.

I'm using PHProjekt 4.0.4 with CMS 0.6.0b10.

With error_reporting(0); I am able to work with PHProjekt, but I cannot run the CMS through the tab in the menu, but receive the blank white (aargh! it's so bright! ) page. If I call the CMS-page directly it works excellent.

I removed every blank after ?> with no effect, the error-message remains.

Any clue?
Thanks in advance

Gronf[/b]

Gronf:

> hi there, I discovered the same problem
> after changing line 19 in index.php like
> Guest did before. I'm using PHProjekt 4.0.4
> with CMS 0.6.0b10.
> With error_reporting(0); I am able to work
> with PHProjekt, but I cannot run the CMS
> through the tab in the menu, but receive
> the blank white (aargh! it's so bright! ) page.
> If I call the CMS-page directly it works excellent.
> I removed every blank after ?> with no effect,
> the error-message remains.
> Any clue? Thanks in advance

Ok, those messages are warnings caused by Phprojekt (mostly harmless). However, because they are displayed before the session/cookie setting they cause a fatal error.

Well, restore error reporting in index.php to 0 and lib/lib.inc.php (if you modified that) and only enable it in cm/cm_lib.inc.php (with E_ALL). Then recheck.

When you see the blank page, has the page finished loading or is the browser still waiting? Did you run the cm/setup.php script without problems? Can you access cm/console.php without problems?

Regards,

Mario A. Valdez-Ramirez.

Hi Mario,

thanks for your very fast answer

>Well, restore error reporting in index.php to 0 and
> lib/lib.inc.php (if you modified that) and only enable it in >cm/cm_lib.inc.php (with E_ALL). Then recheck.

Okay.. did it and received many notices like:
Notice: Undefined offset: 4 in <mysitepaths>/phprojekt/cm/cm_constraints.inc.php on line 269, so I changed the entry in cm/cm_lib.inc.php back to E_ALL and E_NOTICE. Now it works.

>When you see the blank page, has the page finished
>loading or is the browser still waiting?
The browser seems to received all data and has finished the load process.

>Did you run the cm/setup.php script without problems?
Yep, it worked great with no problems!

>Can you access cm/console.php without problems?
And so again.. it works without any problem.

Everything is working good, but seperate..mhh..I tried something:
I checked out the cm_navigation.inc.php and changed the URL to the absolute cm-path. OK, the menu is gone and CM is working.. should assign the frame called "u"
I just had that idea and I'm not a PHP-coder (but I'm learning )..

BTW, you did a great job with CM.. thanks!

best regards

Gronf

I think that this is the answer to your problems:
When you insert the include into PHProjekt's index.php
Make sure you do it like this:

If you put the include after the frameset echo, you will just get a blank page.

Hope this helps!
Mark Coudriet

Mark.. you are my life-saver
..and I believe you heard that many times before...


You were absolutely right.The problem was the order of the commands, because I used:

and not vice versa..
now it's really clear and of course, I've should have seen it..
How could I include something after the frames are built?
Of course the CMS wouldn't appear, I wouldn't either

I feel a bit ..

Maybe it was the bright light from the blank page or the insufficiency of coffee .. who knows?

Anyway, thanks for your help and now I will take a look at the your new theme

Have a nice weekend and best regards from Rosenheim/Germany

Gronf(uzius.. not wise, but old )

Mark:

Thanks for answering this one... I'll add it to the FAQ. The problem seems so simple, yet I didn't thought about it.


Regards,

Mario A. Valdez-Ramirez.